Media Blasting

Special machines are used for the stripping of coatings and compounds from different metals and other materials and over the years sand blasting has been one of the most common ways of doing so. Media blasting materials used in these machines are very fine sand particles which use pressure of compressed air to spray the metals and the abrasive sand will strip the metal clean. There are, of course, a variety of other methods used to clean surfaces from chipping and scraping manually to the use of flames and special chemicals. New research into other Media blasting materials have discovered many other compounds that can be used even more effectively like plastic and nylon grits walnut shell grits made from casings and nylon pellets.

The automotive marine and aircraft industry commonly use Media blasting techniques for the stripping of paints and other coatings for refinishing and if you have been looking for a variety of eco-friendly Media blasting materials Composite Materials, Inc. is the largest supplier globally for many different types. Besides medial blasting compounds there are also a variety of extenders and fillers used in cosmetics and adhesives, for example, which we have in any quantities you need. We have designed our website to show you that there are far better options in Media blasting materials for your equipment than sand and chemicals for stripping and you can read some interesting technical data of the different Media blasting compounds and their applications.

Walnut shell casings in different grades are far more effective to remove organic coatings and baked on coatings, layer by layer down to an undercoat protective layer for repainting or recoating. Sand blasting techniques are apt to completely strip off protective layers down to bare metal surfaces and even cause pitting and marking. With such a vast selection of different Media blasting compounds you can now make the right choice for your desired purposes to streamline any job using our guidelines and suggestions. Composite Materials, Inc. has a variety of strategically placed suppliers all over the world as you can see on our map where you can source the right Media blasting compounds for your equipment and industry. If you are interested in becoming a supplier and distributor of Media blasting there are also options open for other locations and we would like to hear from interested parties.

Take some time to read about the different Media blasting materials there are available as well as the other compounds suitable for many applications from cosmetics to adhesive fillers we have at Compo Mat. You are welcome to contact expert technical personnel that will be glad to help you with your inquiry and arrange the supply and delivery of Media blasting materials to your desired locations. The different Media blasting can be used in everything from hand cleaner additives to polishing machines fiberglass to de-flashing operations with everything from corn cob grit to different nut shell powders of different grades and we have all of them under one roof for your convenience.